Reclaimed materials: do the records match the batch?
Before buying reclaimed building materials, ask the seller to connect the actual batch on offer to its supporting records. Which pieces do the photographs show? Where did the sample come from? Does a supplied report identify this material, and has the person assessing your project considered its intended use?
A folder of documents is useful only when those connections are clear. Keep the history, the seller's description and the professional assessment separately identifiable. If the offered material changes, ask for the change to be reviewed rather than assuming the earlier answer travels with it.
This guide concerns pre-purchase records, not choosing a structural material or testing an old coating. The example and blank note below are original editorial aids, not official forms or evidence that a batch is suitable. Use a qualified professional for the technical assessment; do not cut, scrape or dismantle material to complete the note.
Give the offer a fixed reference
Save the listing or written offer with its date and seller's reference. Ask how that reference identifies the material held at the yard. If the seller uses different names on the quotation, photographs and storage labels, request a written explanation linking them.
For your own folder, use a plain description such as "stone for proposed entrance floor, offer A". Keep that household label beside the seller's reference rather than replacing it. Someone who has never seen your notes should be able to tell which offer you mean.
The FCRBE reclamation-audit guide, physical PDF pages 43–46, explains why apparently identical products may need separate batch entries when their previous application or treatment differs. It also distinguishes quantities and dimensions from estimates. This is professional inventory guidance, not a purchasing certificate.
Ask whether the offer concerns one identified lot or material assembled from several sources. Retain the answer as given. If the seller cannot establish that history, record the gap without supplying a plausible building or age yourself.
Keep the unit beside a quantity and identify who supplied it. If a description says "approximately", preserve that word when passing it to the designer. Ask the installer to confirm the required quantity separately; do not turn the amount advertised into the amount available for installation.
Separate a history from a current assessment
An old photograph can document an earlier setting. A maker's document can describe a product when supplied. Ask your assessor which records are relevant now and what additional evidence is needed for the use you propose.
The FCRBE technical-performance guide, physical pages 8–10, treats intended use as the starting point for identifying performance requirements. It cautions that characteristics recorded before removal may change during extraction, transport or refurbishment, and that an original declared performance may no longer apply.
For the enquiry, write the proposed location and job in ordinary language. "Floor in the entrance room" says more than "stone for renovation". Include the project location so the professional can consider the requirements that apply there. This article does not establish what approvals or tests your country requires.
Ask who supplied each document and whether it refers to the material before or after any preparation. If someone has already given an opinion, request the complete written response with its qualifications. Keep "suitable if further checks are satisfactory" intact; do not shorten it to "suitable" in your purchasing notes.
Where a record is missing, ask the assessor whether the uncertainty can be resolved and by whom. The aim is an explicit next step, not a folder padded with unrelated product brochures.
Check what a sample or report represents
Ask the seller to identify where the sample came from and how it relates to the offered lot. Give the assessor that information alongside the sample, rather than presenting the piece on its own. If the answer is unknown, say so.
The technical-performance guide's discussion of sampling and batch consistency, physical pages 13–14, explains that assessing an element requires attention to how it represents the wider batch. It is not a household sampling recipe. Let the responsible professional decide what examination or testing is appropriate.
When a report arrives, ask which batch or sample its identifier refers to, which property it addresses and what it leaves outside its scope. Request clarification from the assessor where the references do not line up. Do not interpret a number in isolation or use a test of one property as your own verdict on the whole proposed installation.
You can also record your appearance preference separately. "We like this colour" is a household decision. "The proposed material meets the project's requirements" is a different conclusion, needing the relevant assessment. Neither statement should silently stand in for the other.
A fictional change of batch
Imagine a household considering reclaimed stone for an entrance floor. The seller calls the offered lot A. The household sends photographs labelled A and a sample identified as A to its designer. The designer asks for further information before deciding whether it is appropriate.
Before that question is resolved, the seller offers lot B instead, describing it as a close visual match. The household still likes the colour. It also still has the original photographs, the sample and the designer's earlier email.
The useful response is to stop treating that folder as a record of B. Keep A's documents, but mark the offer as superseded in the household notes. Ask for B's identifying information and send the proposed substitution to the designer, pointing out that the earlier sample came from A. Record which questions remain open and whether new evidence is required.
Nothing in this invented example establishes that B is better or worse. It illustrates a change in what the evidence refers to. The decision belongs to the actual proposed material and use, not to whichever email arrived first.
A smaller change deserves the same clear description. If only part of an offer is replaced, ask which part. Avoid rewriting the entire order as "unchanged" simply because the total quantity remains the same.
Keep a short evidence-and-change note
Use this blank note with the offer, photographs and professional correspondence. It is deliberately shorter than a material inventory and does not replace one. Leave unanswered fields open.
Offer under consideration
- Seller's offer reference and date:
- Household project label; proposed location and use:
- Batch references included in this offer:
- Quantities and units, including any estimates:
- Seller's explanation connecting the offer to the stored material:
Evidence sent for review
- Document or photograph filename; who supplied it and when:
- Batch or sample it identifies:
- Earlier use or preparation history stated in that record:
- Unclear connection or missing information:
- Assessor contacted; question asked; response received:
- Conditions or further checks still outstanding:
Later change
- What changed, and who reported it:
- Previous reference and replacement reference:
- Which earlier records no longer describe the current offer:
- New information sent to the assessor:
- Decision or further action, responsible person and date:
Keep original files rather than replacing them with edited summaries. Where your note paraphrases a conversation, identify it as your summary and ask the relevant person to confirm anything important before you rely on it.
Resolve the missing link before collection
Before arranging collection, review the current offer with the person responsible for assessing the material. Ask them to identify any unresolved connection between the lot, the evidence and the proposed use. Confirm who will respond if the material presented for collection differs from the agreed description.
For the handover itself, ask the supplier how the batch references will remain identifiable and which documents will accompany them. The reclamation-audit guide's identification guidance uses precise element names and identifiers to avoid confusing similar packages; that principle is useful when discussing your own records, without adopting its professional audit process.
Keep any outstanding technical decision visible. If a seller offers a replacement, return to the assessor with the changed offer. Arrange the purchase around a clear answer about the material actually proposed, rather than an assumption based on a sample or document from another batch.