A damp-feeling room: what to record before a survey
If a room feels damp, write down what you have noticed, where it occurs and when you first saw it. Keep dated photographs and any history of changes to the room. Take those observations to a suitably experienced building surveyor rather than using them to choose a treatment yourself.
A dark mark, a musty smell and droplets on a window are different things to report. They do not, on their own, tell you where moisture comes from. The RICS consumer guide stresses finding the moisture source before deciding how to address it.
The note below is an original preparation aid, not a diagnostic checklist or an official survey form. It concerns visible conditions and questions for a professional. It does not identify mould, establish whether a room is safe or prescribe cleaning, ventilation settings or building repairs. Do not delay reporting a concern while you complete it.
Put a location beside each observation
Start with one room and give each affected area a label. "Bedroom, wall beside the courtyard door" is easier to find again than "damp downstairs". On a rough sketch, mark the doorway and window so somebody else can understand which corner you mean.
Describe what is visible without naming a cause. For example, an illustrative note might say: "Brown mark below the left corner of the window; photograph A." That is more useful than writing "window leak" before anyone has investigated. If the room only feels damp to you and there is no visible mark, say exactly that.
Record a smell as something you noticed, not a test result. Do not touch, scrape or closely sniff a suspect surface to improve the description. You do not need to move a heavy wardrobe or open a concealed space for this exercise. Write "not visible behind furniture" where access is limited.
Take a wider photograph showing the location and, if possible from the same safe position, a closer view. Keep the originals with their dates. Avoid filters, and remove private documents or people from the frame. A photograph is a record of appearance, not confirmation of the material or condition pictured.
Separate first noticed from first happened
Write the date you first noticed the problem, then distinguish that from anything you remember about earlier months. "First noticed after returning from a trip" leaves open what happened while nobody was there. It does not establish that the problem began on the return date.
If you see a change before the appointment, add a new entry rather than replacing the old one. Note the local time, weather you actually observed and what looked different. Keep an unchanged observation too. Do not fill a gap with a claim that a mark stayed dry or spread continuously while you were away.
Rain can be useful context, but keep the sequence honest: "Photographed the morning after rain" is not the same as "caused by rain". A short record gives the surveyor something to investigate; it does not prove a repeating pattern.
For traditional buildings, RICS's introduction to the joint position statement calls for assessment of the whole building rather than reliance on potentially misleading data. Let the professional decide which further observations are needed.
Bring the room's history, including the unknowns
Look for records you already have: an earlier survey, a repair invoice, dated photographs or a description of recent decorating. List changes separately from the symptoms. A new floor covering and the first sighting of a stain may belong on the same timeline without one proving the cause of the other.
Add what you know about how the room is used. Note periods when it was unoccupied, ordinary heating operation, and whether a window or extractor could be used as intended. Record constraints in plain language. "The window cannot be opened" is more informative than a judgement about whether someone ventilates enough.
Do not change household routines or switch equipment off to provoke a result. You are describing the home as it is used, not running an experiment. Keep a previous owner's statement separate from your own observation and attach the document if one exists.
If the wall layers, paint type or floor construction are unknown, leave them unknown. Do not strip a finish to find out. The 2022 joint position statement, sections 1 and 4, includes alterations, construction and occupiers' observations in professional assessment. That is a reason to bring records, not to undertake the inspection yourself.
Keep measurements in their original context
You do not need to buy a meter before contacting a surveyor. If you already have readings, retain the device name, displayed unit, date, time and exact position. Identify who took them. Send the original record rather than relabelling a coloured warning indicator as a percentage of water in the wall.
RICS warns against diagnosis based only on a damp meter, particularly on hard walls and solid floors: conductive materials other than moisture can affect readings. Ask how any measurement contributes to the proposed explanation and what corroborating evidence exists.
Leave numbers you did not measure blank. Keep a room-air reading separate from a reading taken on a surface. If a contractor has already supplied results or a proposed treatment, include that report so the surveyor can see what was actually recorded and recommended.
Agree the investigation before discussing a product
When contacting a surveyor, describe the building and the concern briefly. Ask about experience with that construction and moisture investigations. RICS notes that membership alone does not establish the relevant specialist experience; its professional-help section suggests asking about the surveyor's background in building pathology.
For a traditional building, ask whether the proposed inspection follows the joint position statement. Outside the UK, ask a qualified local professional which assessment framework and local requirements apply. Do not treat a UK document as proof of compliance elsewhere.
Confirm what the appointment includes. Will you receive a written explanation? Which areas will be inaccessible? Who would arrange any further investigation? Ask whether the person recommending work also sells or carries out that work, and request any relevant commercial interests in writing.
The joint statement's report section calls for clear diagnosis, disclosure of conflicts and explanations of options or staged monitoring where appropriate. Use that to ask for an account of the evidence, not merely a treatment name.
Copy this appointment note
These fields are deliberately unfilled. Use them for the initial enquiry even if you have only one observation. If you rent, report concerns promptly to the landlord or managing agent, as the RICS guide advises; this note does not replace that report or local advice about responsibilities.
What I can report
- Property location, room and affected-area label:
- What I noticed, in my own words:
- First noticed date; earlier history and who supplied it:
- Dated photograph references:
- Later observations, including weather and gaps in observation:
- Relevant room use, equipment limitations or periods away:
- Known changes, previous reports and supporting documents:
- Areas not visible and construction details not known:
- Date reported, recipient and response received:
What I need the surveyor to explain
- What does the available evidence establish, and what remains uncertain?
- What parts of the building will the inspection cover?
- Which measurements or further investigations are justified, and why?
- What can be assessed without opening up the building?
- If further access is needed, who obtains permission and makes arrangements?
- What needs attention promptly, and what can appropriately be monitored?
- What will the written report include, and who answers follow-up questions?
After the appointment, keep the professional's conclusions separate from your original notes. Record the agreed next action, who is responsible and when you should expect a response. If something remains unexplained, ask for clarification before turning a suggested treatment into an instruction to start work.